layout: default title: "Edge Flip Tutorial" permalink: /meshedit/local/edge_flip nav_order: 1 parent: Local Operations grand_parent: "A2: MeshEdit" usemathjax: true

Edge Flip Tutorial

Here we provide a step-by-step guide to implementing a simplified version of the EdgeFlip operation (rotate an edge counter-clockwise by one vertex) for a pair of triangles---the final version, however, must be implemented for general polygons (i.e., any n-gon). The basic strategy for implementing the other local operations is quite similar to the procedure outlined below.

Note: if you're not familiar with C++, you should definitely take a moment to learn about the standard library class std::vector, especially the method push_back(), which will make it easy to accumulate a list of pointers as you walk around a polygon, vertex, etc.

We now consider the case of a triangle-triangle edge flip.

PHASE 0: Draw a Diagram

Suppose we have a pair of triangles (a,b,c) and (c,b,d). After flipping the edge (b,c), we should now have triangles (a,d,c) and (a,b,d). A good first step for implementing any local mesh operation is to draw a diagram that clearly labels all elements affected by the operation:

Here we have drawn a diagram of the region around the edge both before and after the edge operation (in this case, "flip"), labeling each type of element (halfedge, vertex, edge, and face) from zero to the number of elements. It is important to include every element affected by the operation, thinking very carefully about which elements will be affected. If elements are omitted during this phase, everything will break---even if the code written in the two phases is correct! In this example, for instance, we need to remember to include the halfedges "outside" the neighborhood, since their "twin" pointers will be affected.

PHASE I: Collect elements

Once you've drawn your diagram, simply collect all the elements from the "before" picture. Give them the same names as in your diagram, so that you can debug your code by comparing with the picture.

  HalfedgeRef h0 = e0->halfedge();
  HalfedgeRef h1 = h0->next();
  HalfedgeRef h2 = h1->next();
  HalfedgeRef h3 = h0->twin();
  HalfedgeRef h4 = h3->next();
  HalfedgeRef h5 = h4->next();
  HalfedgeRef h6 = h1->twin();
  HalfedgeRef h7 = h2->twin();
  HalfedgeRef h8 = h4->twin();
  HalfedgeRef h9 = h5->twin();

  VertexRef v0 = h0->vertex();
  VertexRef v1 = h3->vertex();
  // fill in the rest!...

  // EDGES
  EdgeRef e1 = h5->edge();
  EdgeRef e2 = h4->edge();
  // fill in the rest!...

  // FACES
  FaceRef f0 = h0->face();
  // fill in the rest!...

PHASE II: Allocate new elements

If your edge operation requires new elements, now is the time to allocate them. For the edge flip, we don't need any new elements; but suppose that for some reason we needed a new vertex v_4. At this point we would allocate the new vertex via

  VertexRef v4 = new_vertex();

(The name used for this new vertex should correspond to the label you give it in your "after" picture.) Likewise, new edges, halfedges, and faces can be allocated via the methods new_edge(), new_halfedge(), and new_face().

PHASE III: Reassign Elements

Next, update the pointers for all the mesh elements that are affected by the edge operation. Be exhaustive! In other words, go ahead and specify every pointer for every element, even if it did not change. Once things are working correctly, you can always optimize by removing unnecessary assignments. But get it working correctly first! Correctness is more important than efficiency.

  h0->next() = h2;
  h0->twin() = h3;
  h0->vertex() = v2;
  h0->edge() = e0;
  h0->face() = f0;
  h1->next() = h3;
  h1->twin() = h6;
  h1->vertex() = v1;
  h1->edge() = e4;
  h1->face() = f1;
  // example of set_neighbors
  h2->set_neighbors(h4, h7, v3, e3, f0)
  // fill in the rest!...

  // ...and don't forget about the "outside" elements!...
  h9->next() = h9->next(); // didn't change, but set it anyway!
  h9->twin() = h5;
  h9->vertex() = v1;
  h9->edge() = e1;
  h9->face() = h9->face(); // didn't change, but set it anyway!

  v0->halfedge() = h4;
  v1->halfedge() = h1;
  v2->halfedge() = h5;
  v3->halfedge() = h2;

  // EDGES
  e0->halfedge() = h0; // fill in the rest!...

  // FACES
  f0->halfedge() = h0; // fill in the rest!...

PHASE IV: Delete unused elements

If your edge operation eliminates elements, now is the best time to deallocate them: at this point, you can be sure that they are no longer needed. For instance, since we do not need the vertex allocated in PHASE II, we could write


You should be careful that this mesh element is not referenced by any other element in the mesh. But if your "before" and "after" diagrams are correct, that should not be an issue!

Design considerations

The basic algorithm outlined above will handle most edge flips, but you should also think carefully about possible corner-cases. You should also think about other design issues, like "how much should this operation cost?" For instance, for this simple triangle-triangle edge flip it might be reasonable to:

Formally proving that your code is correct in all cases is challenging, but at least try to think about what could go wrong in degenerate cases (e.g., vertices of low degree, or very small meshes like a tetrahedron). The biggest challenge in properly implementing this type of local operation is making sure that all the pointers still point to the right place in the modified mesh, and will likely be the cause of most of your crashes! To help mitigate this, Scotty3D will automatically attempt to validate your mesh after each operation, and will warn you if it detects abnormalities. Note that it will still crash if you leave references to deleted mesh elements!

Table of Content